Giá bán: Call
Mã sản phẩm: AB-1150
Thương hiệu: Ueshima - Japan
Bảo hành: 12 months
AB-1150 LAMBOURN ABRASION TESTER
Manufacturer: Ueshima – Nhật
Outline:
Among various abrasion tester for rubber such as tire, belt, and sole etc., it is Lambourn Type Abrasion Tester that is evaluated as the best reappearance in JIS K6264(Abrasion Testing Method of Vulcanized Rubber) as well as high correlation with the result of product test.
MODEL AB-1150 with high accuracy and stability invented in the method of load which has the largest influence on abrasion test result. As the result, high-performance & low-cost material tester which is available for direct simulation of quality test, was introduced to the field of tribology.
Feature
○The most suitable test condition to simulate the particular product such as tire, belt, roller, and sole etc., , can be selected.
○Instead of dead weight method for pressing force to the testpiece , feed back control method(Patent Pending) which is loaded by air cylinder and is detected by load-cell, is adopted. As a result , not only highly accurate and stable test condition can be obtained, but also bounding problem is solved by highly corresponding damping.
○Both rotating axis of testpiece and glindstone are feed back controlled independently by servo motor to test under conditions of more stable circumferential speed and slip ratio.
Specification:
Applicable Standard: JIS K6264-2, ISO23337
Dimensions of testpiece: Diameter 49mm, Inner dia. 23mm, Thickness 5mm or 10mm
Dimensions of grindstone: Diameter 175mm, thickness 25mm
Material of grindstone: Grain: C, grain size:80, binding strength: K, (JIS R6210)
Circumferential speed of testpiece: 10 to 200m/min., driven & controlled by AC servo motor
Circumferential speed of grindstone: 10 to 200m/min., driven & controlled by AC servo motor Grindstone speed is automatically determined by setting the sample speed and slip ratio.
Indication of circumferential speed: Digital 4 digits indication (testpiece & grindstone)
Slip ratio setting: Arbitrary setting in 5 to 80% range. (Setting unit 0.1%)
Loading load: Load can be arbitrary set in 5 to 80N range. Air cylinder drive, load cell detection feedback control.
Torque: Sample axis 5Nm
Output: Load, torque DC 0 to 5V
Setting time: Max.999min.59sec.
Temperature inside test chamber(option): Room temperature +10℃ to 120℃
Sand dropping device: Container capacity 4 liter, helical gear drive sand drop type, sand collection in box placed at bottom of the chamber. Kind of sand: carborundum grit 80(JIS R 6111)
Electric and air sources: 3 Phases, AC200V, 50/60Hz
Air: Dry clean air 0.5 to 0.8Mpa
Outside dimensions: 810W x 830D x 1150H（1980 With optional stand）(H)ｍｍ
Weight: 380kg (Body and Stand)
OPTION: Temperature measuring device for testpiece, stand, mold for testpiece preparation
AB-1150 LAMBOURN ABRASION TESTER
Manufacturer: Ueshima – Nhật
Outline:
Among various abrasion tester for rubber such as tire, belt, and sole etc., it is Lambourn Type Abrasion Tester that is evaluated as the best reappearance in JIS K6264(Abrasion Testing Method of Vulcanized Rubber) as well as high correlation with the result of product test.
MODEL AB-1150 with high accuracy and stability invented in the method of load which has the largest influence on abrasion test result. As the result, high-performance & low-cost material tester which is available for direct simulation of quality test, was introduced to the field of tribology.
Feature
○The most suitable test condition to simulate the particular product such as tire, belt, roller, and sole etc., , can be selected.
○Instead of dead weight method for pressing force to the testpiece , feed back control method(Patent Pending) which is loaded by air cylinder and is detected by load-cell, is adopted. As a result , not only highly accurate and stable test condition can be obtained, but also bounding problem is solved by highly corresponding damping.
○Both rotating axis of testpiece and glindstone are feed back controlled independently by servo motor to test under conditions of more stable circumferential speed and slip ratio.
Specification:
Applicable Standard: JIS K6264-2, ISO23337
Dimensions of testpiece: Diameter 49mm, Inner dia. 23mm, Thickness 5mm or 10mm
Dimensions of grindstone: Diameter 175mm, thickness 25mm
Material of grindstone: Grain: C, grain size:80, binding strength: K, (JIS R6210)
Circumferential speed of testpiece: 10 to 200m/min., driven & controlled by AC servo motor
Circumferential speed of grindstone: 10 to 200m/min., driven & controlled by AC servo motor Grindstone speed is automatically determined by setting the sample speed and slip ratio.
Indication of circumferential speed: Digital 4 digits indication (testpiece & grindstone)
Slip ratio setting: Arbitrary setting in 5 to 80% range. (Setting unit 0.1%)
Loading load: Load can be arbitrary set in 5 to 80N range. Air cylinder drive, load cell detection feedback control.
Torque: Sample axis 5Nm
Output: Load, torque DC 0 to 5V
Setting time: Max.999min.59sec.
Temperature inside test chamber(option): Room temperature +10℃ to 120℃
Sand dropping device: Container capacity 4 liter, helical gear drive sand drop type, sand collection in box placed at bottom of the chamber. Kind of sand: carborundum grit 80(JIS R 6111)
Electric and air sources: 3 Phases, AC200V, 50/60Hz
Air: Dry clean air 0.5 to 0.8Mpa
Outside dimensions: 810W x 830D x 1150H（1980 With optional stand）(H)ｍｍ
Weight: 380kg (Body and Stand)
OPTION: Temperature measuring device for testpiece, stand, mold for testpiece preparation
Nội dung chi tiết video sản phẩm đang được cập nhật...
Nội dung chi tiết download đang được cập nhật...
OPTION: Temperature measuring device for testpiece, stand, mold for testpiece preparation
