Rubber Plastimeter

SPECIFICATION & COMPONENTS
[Specifications]
[Plastimeter]

Automatic calculating PRI (Plasticity Retention Index)

Comparing to the traditional plastimeter to put upper platen down to lower platen and return it after test by a handheld bar manually, EKT-2003R just need to press one button to start test and then upper platen down and up operation will be automatically.
1. Manufacturing standards: According to ASTM D3194, ISO 2930, ISO 2007
2. Upper platen size: Diameter 10 mm
3. Lower platen size: Diameter 10 mm
4. Testing temperature: 100℃ (or optional 60~180℃ )
5. Testing time: 15 sec condition, 15 sec load
6. Compression force: 100N
7. Electricity: Single phase 220±10% VAC, 50/60±3Hz, 1KW
8. Dimensions: 380(W) x 380(D) x 600(H) mm
9. Weights: 35kg
[High Efficiency Ageing Chamber]
1. Manufacturing standards: According to ASTM D3194, ISO 2930
2. Chamber size: 50(W) x 280(D) x 12(H) mm
3. Number of heating Chambers: 4
4. Number of dishes per tray: 4
5. Number of samples: max. 12 pieces for each tray, and total max. 48 pieces for 4 trays
6. Ageing temperature: 140℃
7. Temperature recovery: ＜ 2 minutes after sample puts in the chamber
8. Electricity: Single phase 220±10% VAC, 50/60±3Hz, 2.8KW
9. Dimensions: 300(W) x 600(D) x 280(H) mm
10. Weights: 35kg
[Components]
1. Basic components
1) One set of Plastimeter, including specimen cutter.
2) One set of Ageing Chamber, including 4 trays and 16 sample dishes

2. Standard Accessories
1) One piece of specimen cutter
2) Five packs of RIZLA + paper
3) 1mm calibration block gauge
4) One book of operation manual