Materials lab equipment

Box Compression Tester

PNshar
12 months

PN-CT50KA Box Compression Tester

Box Compression Tester

PNshar

PN-CT50KD Box Compression Tester

Rubber Plastimeter

UnitedTesting - China
12 Months

Rubber Plastimeter

Moving Die Rheometer

UnitedTesting
12 Months

Moving Die Rheometer

Rubber Mooney Viscometer

UnitedTesting - China
12 Months

Rubber Mooney Viscometer

EK-300i Balance

A&D
12 Months

EK-300i Balance

GF-224A Analytical Balance

A&D
12 Months

GF-224A Analytical Balance

Rubber Flat Die Rheometer

Ueshima
12 months

Flat Die Rheometer (FDR) VR 3110 JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter) FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd., 加硫試験機

Mooney Viscometer

Ueshima
12 Months

VR-1130 Series Mooney Viscometer: ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber ●Measurement of Mooney stress relaxation for unvulcanized rubber (MODEL: VR-1132), ムーニー粘度計

Rubber, raw Colour index test

Carver
12 months

Rubber, raw natural-Colour index test: Heating Presses, LOVIBOND COLOUR DISC

Rubbers, raw-Determination of volatile-matter oven method

France Etuves
12 months

Rubbers, raw-Determination of volatile-matter content-Hot-mill method and oven method-ISO 248 (TCVN 6088)

Rubber, raw natural, Determination of nitrogen content

Secovina
12 months

Rubber, raw natural, and rubber latex, natural Determination of nitrogen content ISO 1656 (TCVN 6091)

Natural Rubber-Determination of ash

Nuve
12 tháng

TCVN 6087-ISO 247: Rubber-Determination of ash

Determination P0 and PRI (Plastimeter)

Montech
12 months

Rubber, unvulcanized – Determination of plasticity – Rapid – plastimeter method P0 and Determination of plasticity retention index (PRI)

Raw natural - Determination of dirt content

Secotech
12 months

Equipment for Rubber, raw natural - Determination of dirt content ISO 249

Singe Water Stills

UK
12 months

Laboratory Water Stills

Laboratory Rubber testing equipment

G7
12 months

Rubber testing equipment

Natural Rubber Heated Press

Carver
12 months

Rubber Heated Press

Rubber Tensile Tester

United Testing Systems
12 months

The DSTM-2.5KN incorporates a PC-compatible computer for data acquisition and machine control functions.

5KN Universal testing machine

United Testing Systems
12 months

DSTM-5KN Universal testing machine

EK-300i Balance

A&D
12 Months

EK-300i Balance

GF-224A Analytical Balance

A&D
12 Months

GF-224A Analytical Balance

Latex MTS

SECOTECH - Việt Nam
12 months

Latex Mechanical Stability Tester

Singe Water Stills

UK
12 months

Laboratory Water Stills

Rubber Plastimeter

UnitedTesting - China
12 Months

Rubber Plastimeter

Moving Die Rheometer

UnitedTesting
12 Months

Moving Die Rheometer

Rubber Mooney Viscometer

UnitedTesting - China
12 Months

Rubber Mooney Viscometer

GF-224A Analytical Balance

A&D
12 Months

GF-224A Analytical Balance

Rubber anf Plastic GEER’S AGING OVEN

Ueshima - Japan
12 Months

Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.

rubber Blow Point Analyzer

Ueshima - Japan
12 Months

Rubber Blow-Point Analyzer Manufacturer: Ueshima - Japan

AUTOMATIC HYDRAULIC PRESS FOR PLASTIC

China
12 Months

AUTO-HYDRAULIC PRESS WITH HEATING

Rubber Flat Die Rheometer

Ueshima
12 months

Flat Die Rheometer (FDR) VR 3110 JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter) FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd., 加硫試験機

Mooney Viscometer

Ueshima
12 Months

VR-1130 Series Mooney Viscometer: ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber ●Measurement of Mooney stress relaxation for unvulcanized rubber (MODEL: VR-1132), ムーニー粘度計

Rubber and plastic Intermeshing Mixer

ChareonTut

CT Internal Mixer and CT Intermeshing Mixer are suitable for many applications: • Rubber and/or Plastic Blending • Thermoplastic Elastomer Preparation • Rubber and/or Plastic Compounding • Food Product, i.e. Starch Modification

Natural Rubber Heated Press

Carver
12 months

Rubber Heated Press

Rubber Tensile Tester

United Testing Systems
12 months

The DSTM-2.5KN incorporates a PC-compatible computer for data acquisition and machine control functions.

5KN Universal testing machine

United Testing Systems
12 months

DSTM-5KN Universal testing machine

Rubber anf Plastic GEER’S AGING OVEN

Ueshima - Japan
12 Months

Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.

Laboratory Two Roll Mill For Plastic

Taiwan
12 months

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS

AUTOMATIC HYDRAULIC PRESS FOR PLASTIC

China
12 Months

AUTO-HYDRAULIC PRESS WITH HEATING

Laboratory Cable Abrasion Tester

Ueshima
12 months

Ueshima AB-5110 Cable Abrasion Tester

Rubber and plastic Intermeshing Mixer

ChareonTut

CT Internal Mixer and CT Intermeshing Mixer are suitable for many applications: • Rubber and/or Plastic Blending • Thermoplastic Elastomer Preparation • Rubber and/or Plastic Compounding • Food Product, i.e. Starch Modification

5KN Universal testing machine

United Testing Systems
12 months

DSTM-5KN Universal testing machine

10KN Universal Testing Machine

United Testing Systems
12 months

United DSTM-10KN Universal Testing Machine

20KN Universal Testing Machine

United Testing Systems
12 months

Universal Testing Machine DSTM-20KN

50KN Universal Testing Machine

United Testing Systems
12 months

50KN Universal Testing Machine

100KN Universal Testing Machine

United Testing Systems

100KN Universal Testing Machine

50KN Universal Testing Machine

United Testing Systems
12 months

50KN Universal Testing Machine

100KN Universal Testing Machine

United Testing Systems

100KN Universal Testing Machine

Tensile Testing Machine

United Testing Systems
12 Months

LHC-150KN United Hydraulic Tensile Testing Machine

150KN Universal testing machine

United Testing Systems
12 Months

United DFM-150KN Universal testing machine

United DFM-300kn Universal testing machine

United Testing Systems

United DFM-300kn Universal testing machine

DFM Universal Testing Machine

United Testing Systems
12 Months

United Floor Model Smart-1 Machines are the logical choice when maximum crosshead travel and load frame capacity are required. The DFM models offer a choice of four standard load frame capacities. 100kN, 150kN, 300kN and 600kN.

300KN Hydraulic Universal Testing Machine

United Testing Systems
12 months

United High Capacity Smart Universal Hydraulic Floor Model DHFM-300KN tension and compression testing machines with computer control are available with capacities: 300 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.

600KN Universal Testing Machine

United Testing Systems
12 months

UNITED Deluxe SMART Servo Controlled Hydraulic Floor Model Testing System DHFM-600KN tension and compression testing machines with computer control are available with capacities: 600 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.

1000KN Universal Testing Machine

United Testing Systems
12 months

United High Capacity Smart Universal Hydraulic Floor Model (DHFM) tension and compression testing machines with computer control are available with capacities: 300 kN, 600 kN, 1000kN and 2,000 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.

2000KN Hydraulic Universal Testing Machine

United Testing Systems
12 months

United High Capacity Smart Universal Hydraulic Floor Model DHFM-2000KN tension and compression testing machines with computer control are available with capacities: 2000 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.

TRU-BLUE II Computerized Hardness Tester

United
12 months

UNITED TRU-BLUE II Computerized Hardness Tester

Statistical access

  • Đang online 54
  • Hôm nay 3464
  • Hôm qua 5013
  • Trong tuần 54340
  • Trong tháng 302279
  • Tổng cộng 3072849
COPYRIGHT BY CÔNG TY TNHH THIẾT BỊ SECOVINA
Design by 1Onnet