The AlphaFlex10™ is a high elongation tensile tester designed to measure a wide range of rubber materials, including elastomers and non-rigid plastics. It works by applying tensile force to a specimen that has been attached to a variety of counterbalanced clamps at pre-selected gauge lengths. An optical encoder measures the slightest change in gauge length when the specimen is put under force, sending signals into the conditioner interface for processing.
Fully Automatic Dynamic Mechanical Analyzer (DMA) Model VR-7130 was designed to minimize possible causes of measurement errors and variability by adopting the full automatic system and the unique temperature sensor. In combination with THERMO JETTER, it can measure viscoelasticity down to -90°C (-100°C as an option) without using liquid nitrogen.
Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.
- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS
CT Internal Mixer and CT Intermeshing Mixer are suitable for many applications: • Rubber and/or Plastic Blending • Thermoplastic Elastomer Preparation • Rubber and/or Plastic Compounding • Food Product, i.e. Starch Modification
United DSTM-10KN Universal Testing Machine
