Giá bán: Call
Mã sản phẩm: DSTM-2.5KN
Thương hiệu: United Testing Systems
Bảo hành: 12 months
· USB connectivity for high speed data acquisition and control.
· Preload, Test, Stop, and Return operations initiated with one keystroke.
· Preload Force, Test Speed and Return Speed may be preset.
· JOG controls allow fast and accurate crosshead setup.
· Automatic Stop or Return following sample break.
· Graphic display in real time – Load or Stress vs. Extension.
· Load measurement accuracy: ±0.5% of reading from 1% to 100% of rated capacity.
· Extension from crosshead: resolution = 0.12 micron/jaw separation. Accuracy = ±83 microns/meter of travel.
· Extension from extensometers: resolution = 1/262144 of full range. Accuracy per extensometer specifications.
· Standard system supports one load and one extensometer input channel. Additional channels are optional. Resolution: 20 bits binary. DSP filter standard. Conversion rate: programmable.
· Operator-selectable measurement units: English, Metric, SI or mixed.
· Operator may set any test speed within the capacity of the machine by keyboard entry.
· Limits programmable-position, load or strain.
· Cycle functions programmable-position, load or strain control.
· Area compensation can be turned on or off.
· Digital servo control system – optical encoder, digital signal processor, solid-state amplifier.
· Manufactured in USA by United Calibration Corporation.
Force Measurement System
Accuracy: ± the larger of 0.5% of reading or 0.005% of capacity.
Repeatability: ± the larger of 0.25% of reading or 0.005% of capacity.
Loadframe & Drive System Specifications
Lateral Motion: ±0.25mm (0.01 inch) maximum over full crosshead travel.
Speed Accuracy: ±0.1 percent of set speed for all forces within the capacity of the machine when averaged over the larger of 15 seconds or 50mm (2 inches).
Position Resolution: 0.12 Gm (5 microinches)
Position Accuracy: The greater of 0.025mm (0.001 inch) or 0.025% of movement.
Position Repeatability: ±0.005mm (0.0002 inch).
Drive Resolution: Same as position resolution.
Frame Stiffness: 5000 lbs. (2262 Kg)/inch deflection.
Speed Range: 0.001” to 40” (1016mm)/min.
SSTM-2.5KN
Maximum Capacity: 2.5KN (560 lbf)
Crosshead Travel: (excluding load cell & 30” (762mm) fixtures)
Depth to Column: 5” (127mm)
Loadframe Dimensions:
Height: 54” (1371mm)
Width: 12” (305mm)
Depth: 24” (610mm)
Weights
Loadframe: 150 lb (68 Kg)
Computer System: 40 lb (18 Kg)
Nội dung chi tiết video sản phẩm đang được cập nhật...
Nội dung chi tiết download đang được cập nhật...
Nội dung chi tiết phụ kiện sản phẩm đang được cập nhật...
