Foam Tester to ASTM D 3574

Test device for Flammability of Plastic according to UL 94, DIN EN 60695-11-10 , DIN EN 60695-11-20 , ISO 9772, ISO 9773 , ASTM D 635, ASTM D 3801, ASTM D 4804, ASTM D 4986, ASTM D 5048.

Fully Automatic Dynamic Mechanical Analyzer (DMA) Model VR-7130 was designed to minimize possible causes of measurement errors and variability by adopting the full automatic system and the unique temperature sensor. In combination with THERMO JETTER, it can measure viscoelasticity down to -90°C (-100°C as an option) without using liquid nitrogen.

ECS 8040 is a C-H-N-S-O Elemental Analyzer based on the Dumas combustion method.

Rubber Plastimeter

Flat Die Rheometer

Rubber Mooney Viscometer

EK-300i Balance

GF-224A Analytical Balance

Vertical autoclaves with a chamber volume of 80-150 litre

Floor standing autoclaves for laboratory and production, Floor-standing units with 150 to 1,200 litre chamber volume

LabStar Series Laboratory and table-top autoclaves from 25 to 200 litres chamber volume Autoclaves in round and square chamber design Our table-top autoclaves not only fit on any laboratory table, the chamber is also designed to achieve optimum loading capacity with many standard bottles (e.g. Schott) and Erlenmeyer flasks. Our laboratory and table-top autoclaves are available in six different sizes

Sublimator EKS Freeze dryer

Zibus Pilot Freeze Dreyer

Laboratory Freeze Dryer

EKS-R Series Food Freeze Dryer

Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS

Mini Spray dryer is suitable for drying emulsion, suspension or other substances such as thermosensitive substances. It is widely used in drying food, pharmaceutical, beverage, chemical industry and new materials.

LabStar 40 Laboratory tabletop autoclaves