Giá bán: Call
Mã sản phẩm: EKS 50-3
Thương hiệu: Zirbus
Bảo hành: 12 months
Drying chamber:
Material : Stainless steel AISI 316 L
Chamber Dimensions : Ø1000 x 1800mm
Chamber door : Stainless steel with show window
Shelves, liquide temperature controlled:
To freeze and dry product inside the drying chamber.
Number : 6+1 radiation shelve on top
Dimensions : 600x950mm
Total shelf area : 3.42m2
Shelve distance : 80mm
Temperature range : -55…+60°C
Stoppering system for vials
To close vials in the drying chamber under vacuum or gas atmosphere.
Shelves can be moved up and down to close stoppers of vials.
Ice condenser:
Capacity condenser : 50kg/24h, max. 60kg
Final temperature : -75oC
Defrosting : Hot gas
Vacuum
two-stage rotary pump with gas ballast valve, Edwards E2M40
Suction power : 40.0m³/h
Final vacuum of pump : 0.001mbar
Vacuum regulation:
Integrated magnetic valve for vacuum regulation
Instrumentation:
Vacuum sensors: Pirani Vacuum sensor range 0.001...1000 mbar for chamber
Temperature sensors : 3 product probes
probe for shelf temperation
condenser temperature
Control:
Control system : Mitsubishi FXN
Operation / visualization : 7” coloured touchpanel, Drytec “M”
Rrying programmes : 20pcs.
Programme structure : freezing, 10 steps with ramps, Primary drying 10 steps, Secondary drying 10 steps
Dimensions, weights:
Width: 1500mm
Length : 1900mm
Height : 1950mm
Weight : approx. 1000kg
Connection : 400V,3ph., 50Hz
Watercooled compressor:
Instead of air cooled version.
Cooling water required, max. temperature +28°C
Max. water consumption aprox. 1.5 m³/h
Product trays:
Material stainless steel, 24pce.
Dimensions: 300mm x 475mm x 30mm
One set with 24 trays, 4 on each shelve.
One tray has two parts, loading frame and support tray
Front panel
Stainless steel front panel for wall/cleanroom integration.
Maschine parts as compressor, vacuum pump will be in the
dirty area. Loading of product from clean front side.
Visualisation Software
Zirbus “drycontrol”
PC based visualisation and documentation system, SCADA
Operation can be done by PC.
Based software is by Windows Access.
Complete unit with PC, 20” TFT monitore, coloured laser printer
Windows 7, 32bit required.
Drying chamber:
Material : Stainless steel AISI 316 L
Chamber Dimensions : Ø1000 x 1800mm
Chamber door : Stainless steel with show window
Shelves, liquide temperature controlled:
To freeze and dry product inside the drying chamber.
Number : 6+1 radiation shelve on top
Dimensions : 600x950mm
Total shelf area : 3.42m2
Shelve distance : 80mm
Temperature range : -55…+60°C
Stoppering system for vials
To close vials in the drying chamber under vacuum or gas atmosphere.
Shelves can be moved up and down to close stoppers of vials.
Ice condenser:
Capacity condenser : 50kg/24h, max. 60kg
Final temperature : -75oC
Defrosting : Hot gas
Vacuum
two-stage rotary pump with gas ballast valve, Edwards E2M40
Suction power : 40.0m³/h
Final vacuum of pump : 0.001mbar
Vacuum regulation:
Integrated magnetic valve for vacuum regulation
Instrumentation:
Vacuum sensors: Pirani Vacuum sensor range 0.001...1000 mbar for chamber
Temperature sensors : 3 product probes
probe for shelf temperation
condenser temperature
Control:
Control system : Mitsubishi FXN
Operation / visualization : 7” coloured touchpanel, Drytec “M”
Rrying programmes : 20pcs.
Programme structure : freezing, 10 steps with ramps, Primary drying 10 steps, Secondary drying 10 steps
Dimensions, weights:
Width: 1500mm
Length : 1900mm
Height : 1950mm
Weight : approx. 1000kg
Connection : 400V,3ph., 50Hz
Watercooled compressor:
Instead of air cooled version.
Cooling water required, max. temperature +28°C
Max. water consumption aprox. 1.5 m³/h
Product trays:
Material stainless steel, 24pce.
Dimensions: 300mm x 475mm x 30mm
One set with 24 trays, 4 on each shelve.
One tray has two parts, loading frame and support tray
Front panel
Stainless steel front panel for wall/cleanroom integration.
Maschine parts as compressor, vacuum pump will be in the
dirty area. Loading of product from clean front side.
Visualisation Software
Zirbus “drycontrol”
PC based visualisation and documentation system, SCADA
Operation can be done by PC.
Based software is by Windows Access.
Complete unit with PC, 20” TFT monitore, coloured laser printer
Windows 7, 32bit required.
Nội dung chi tiết video sản phẩm đang được cập nhật...
Nội dung chi tiết download đang được cập nhật...
Nội dung chi tiết phụ kiện sản phẩm đang được cập nhật...
