Flat Die Rheometer (FDR) VR 3110 JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter） FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd., 加硫試験機
VR-1130 Series Mooney Viscometer: ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber ●Measurement of Mooney stress relaxation for unvulcanized rubber (MODEL: VR-1132), ムーニー粘度計
Rubber, raw natural-Colour index test: Heating Presses, LOVIBOND COLOUR DISC
Rubbers, raw-Determination of volatile-matter content-Hot-mill method and oven method-ISO 248 (TCVN 6088)
Rubber, raw natural, and rubber latex, natural Determination of nitrogen content ISO 1656 (TCVN 6091)
Rubber, unvulcanized – Determination of plasticity – Rapid – plastimeter method P0 and Determination of plasticity retention index (PRI)
Equipment for Rubber, raw natural - Determination of dirt content ISO 249
The DSTM-2.5KN incorporates a PC-compatible computer for data acquisition and machine control functions.
Fully Automatic Dynamic Mechanical Analyzer (DMA) Model VR-7130 was designed to minimize possible causes of measurement errors and variability by adopting the full automatic system and the unique temperature sensor. In combination with THERMO JETTER, it can measure viscoelasticity down to -90°C (-100°C as an option) without using liquid nitrogen.
the Premier MV is a cost-effective way to perform three critical rubber and polymer tests: • Mooney Viscosity • Mooney Stress Relaxation • Mooney Scorch The enhancements and improved functionality of Premier MV mean one thing for companies who need to add a full-feature viscometer to their line-up – Premier MV gives you more bank for the buck.
The Alpha Technologies PREMIER™ MDR is built for optimum performance in both laboratory and production environments, the PREMIER™ MDR’s stream-lined design includes an LED back-lit logo for test status indication, a wrap-around front cover and shield for ease of use and access, a touch-screen user interface, and a built-in storage drawer. TESTING STANDARDS: Meets ASTM D5289 and ISO6502 and DIN 53529
Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.
Rubber Blow-Point Analyzer Manufacturer: Ueshima - Japan
Flat Die Rheometer (FDR) VR 3110 JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter） FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd., 加硫試験機
VR-1130 Series Mooney Viscometer: ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber ●Measurement of Mooney stress relaxation for unvulcanized rubber (MODEL: VR-1132), ムーニー粘度計
CT Internal Mixer and CT Intermeshing Mixer are suitable for many applications: • Rubber and/or Plastic Blending • Thermoplastic Elastomer Preparation • Rubber and/or Plastic Compounding • Food Product, i.e. Starch Modification
The DSTM-2.5KN incorporates a PC-compatible computer for data acquisition and machine control functions.
Fully Automatic Dynamic Mechanical Analyzer (DMA) Model VR-7130 was designed to minimize possible causes of measurement errors and variability by adopting the full automatic system and the unique temperature sensor. In combination with THERMO JETTER, it can measure viscoelasticity down to -90°C (-100°C as an option) without using liquid nitrogen.
Ueshima AG1110/AG1115 GEER’S AGING OVEN Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212. ○The minimized shape of the series allows use on a table. We also provide with an exclusive stand. ○It is able to place two units in tiers, minimizing the footprint.
- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS
CT Internal Mixer and CT Intermeshing Mixer are suitable for many applications: • Rubber and/or Plastic Blending • Thermoplastic Elastomer Preparation • Rubber and/or Plastic Compounding • Food Product, i.e. Starch Modification
United DSTM-10KN Universal Testing Machine
LHC-150KN United Hydraulic Tensile Testing Machine
United DFM-150KN Universal testing machine
United DFM-300kn Universal testing machine
United Floor Model Smart-1 Machines are the logical choice when maximum crosshead travel and load frame capacity are required. The DFM models offer a choice of four standard load frame capacities. 100kN, 150kN, 300kN and 600kN.
United High Capacity Smart Universal Hydraulic Floor Model DHFM-300KN tension and compression testing machines with computer control are available with capacities: 300 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Ibertest IBMU2 600 MD2i Servohydraulic Testing Machines tension and compression testing machines with computer control are available with capacities: 600 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
United High Capacity Smart Universal Hydraulic Floor Model (DHFM) tension and compression testing machines with computer control are available with capacities: 300 kN, 600 kN, 1000kN and 2,000 kN. Available with extended columns. United ‘SMART’ Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Servohydraulic Testing Machines IBMU4 2000 tension and compression testing machines with computer control are available with capacities: 2000 kN. Available with extended columns. Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
UNITED TRU-BLUE II Computerized Hardness Tester
